Wiper seals - Scraper seals
Mainly used for linear dynamic applications, the wiper seals are used to stop the entry of impurities and to preserve the lubricating film on the contact rod.
The causes of premature deterioration in seals, in the rod and other parts, are pollution (or entry of impurities) in the hydraulic system; that's why France Joint takes special care in its selection of wiper seals.
BECA 472
BECA 472
Materials: Elastomer + Steel
Temperature:
-30°C / +200°C
Speed:
1 m/s
BECA 478
BECA 478
Materials: NBR + Steel + Brass
Temperature:
-40°C / +100°C
Speed:
1 m/s
BECA 480
BECA 480
Materials: PTFE + Elastomer
Temperature:
-30°C / +200°C
Speed:
5 m/s
BECA 482
BECA 482
Materials: PTFE + Elastomer
Temperature:
-30°C / +200°C
Speed:
5 m/s
BECA 483
BECA 483
Materials: PTFE + Elastomer
Temperature:
-30°C / +200°C
Speed:
5 m/s
BECA 485
BECA 485
Materials: PTFE + Elastomer
Temperature:
-30°C / +200°C
Speed:
5 m/s
BECA 486
BECA 486
Materials: PTFE + Elastomer
Temperature:
-30°C / +200°C
Speed:
5 m/s